- SDT-SS19-16
Steam Sterilizer Class N

SDT-SS19-16
1.Steam Sterilizer Class N
2.CE certificate approved

 

SDT-SS19-16 Steam Sterilizer Class N

Open the door and put 800-1000ml of distilled water into bottom of chamber.
·Place steam exhaust PiPe into the water.ensure the air exhausting switch is closed
·Put instrurments on trays.and load trays into the chamber
.Close the door.insert fix pin and lock the door by turning the handle clockwise
.Swich on.choose the working temperature to start the sterilization cycle
·Acoustic signal will inform when the cycle is completed
·Turn on the air exhausting switch and release the pressure till it goes down to OMpa
.Wait for a couple of minutes and take the sterilized instrurments out.

SDT-SS19-16 Steam Sterilizer Class N

SDT-SS19-16 Steam Sterilizer Class N

SDT-SS19-16 Steam Sterilizer Class N

SDT-SS19-16 Steam Sterilizer Class N

SDT-SS19-16 Steam Sterilizer Class N

SDT-SS19-16 Steam Sterilizer Class N

SDT-SS19-16 Steam Sterilizer Class N