Specification:
1.It can heat four type wax simultaneity and keep them in liquid status
2.There is temperature-fixed adjustment,can set the temperature needed+/-1°C
3.Good at heat conduction and insulation
4.Easy to operate and use
5.Melting the wax quickly and keep them in liquid status
6.Equipped digital CPU circuit and set/keep temperature needed
7.Easy to compare pre-set temperature and current temperature
8.LED display heating automatically , LED will shut off when arriving temperature set
9.Easily recognize the specially situation because of accurate temperature sensor

UP9C Sintering Furnace

Fast temperature rise to 1500°C in 20 minutes

Double heating lines can use for cut-ceramic crystal
Zirconia crystal
Ceramic/Glazing
Fast Zirconia /Glazing sintering furnace

1.Fast sintering of the fully form
2.Predrying
3.Maximum sintering temperature 1530°C
4.Finish glazing in 9 minutes
5.Maximum heating speed 200°C/ S
6.Ready to use after power on, without 2 hours
of preheating
7.Active cooling
8.Crown restoration 4-10(60mm dianeter tray)
9. WXLXH:32*36*53cm AND 29*22*13.5cm

ELECTRIC POWER
Operation range 100-120V 50/60HZ 220V 50/60HZ
Electric current 11. 5ampere@110V 5.5ampere@220V
Power max 1200w
POWER UNIT
Voltage controller. The service life of the silicon elema
is effectively prolonged.
VOICE PROMPT
Each stage has voice prompt. Program selection prompt
to prevent using wrong program.

Cleaning Brushes By Hand