Item
AX-ZL5 Vacuum Induction Casting Machine

Certification
CE Approved　ISO9001:2000 Approved

Purpose
This unit can be used with most dental alloys except titanium. It can be used for casting partial frameworks as well we crown and bridge.

Description
The AX-ZL5 Medium Frequency Induction Casting Machine is developed by Aixin Medical. The patented casting machine features compact size, light weight, easy operations, no radiation, and low power consumption. As the casting process is done in an oxygen-free state, the integrity, density and success rate of the castings is increased, which also prevents sand holes, bubbles, and oxidation.

Technical Data
Power Supply: 220V/110V 50/60Hz
Power Consumption: 2,500W
Motor: 370W
Centrifugal Rev: 550rpm
Centrifugal Radius: 21cm
Casting Method: Centrifugal Casting
Max. Melting Amout: 50g
Heating Method: Medium Frequency Induction Heating
Melting time: 30g≤185sec (standard)
Cooling Fashion: Water Cooling 
Vacuum Pump: 120W,1440rpm
Working Pressure: -0.08~-0.09MPa
Vacuum duration:≤1min
Dimensions: 91cm x 68cm x 54cm (H W D)
Shipping Dimensions: 109cm x 80cm x 650cm (H W D)
Weight: 120kg

Parts Included
Machine × 1
Manual × 1
Fuse × 10
Crucible × 5
Crucible Base × 2 
Brush ×1
Tongs × 1
Casting Rings × 3 
"V" Rings Bracket × 2 
Windpipe × 1 
Rubber Gasket × 2 
Silicon Block Gine × 1 
Silicon Bridge × 2
Internal Thread × 1
Connection × 3

Item
AX-MAX1 Dental Vacuum Pressure Casting Machine

Certification
CE Approved　ISO9001:2000 Approved

Purpose
This unit can be used with most dental alloys except titanium. It can be used for casting partial frameworks as well we crown and bridge.

Description
AX-MAX1 Vacuum Pressure Casting Machine is a precision induction casting machine which uses the vacuum pressure method for casting. The vacuum pressure casting machine is better than the centrifugal casting machine in many ways. For example, no vibration is produced during the casting process thanks to the vacuum pressure casting method; lower noise and better cooling result thanks to the water cooling system. This casting machine is ideal for all dental alloys (except titanium). The melting and casting process is done in a vacuum state, argon gas can prevent the oxidation of alloys and precious metals, which reduces the polishing work after casting.

Technical Data
Power Supply: 220V/110V 50/60Hz
Power Consumption: 2,500W
Pressure of Argon:0.2MPa~0.4MPa
Cooling Fashion: Water Cooling 
Air Flow Rate:2 cfm
Max. Pressure:10Pa 
Max. Melting Amount: 80g
Heating Method: Induction Heating
Dimensions (Part A): 52cm x 56cm x 54cm (H W D)
Dimensions (Part B): 70cm x 64cm x 62cm (H W D)
Shipping Dimensions (Part A): 61cm x 56cm x 54cm (H W D)
Shipping Dimensions (Part B): 78cm x 64cm x 62cm (H W D)
Weight: 120kg

Parts Included
Machine × 1
Manual × 1
Fuse × 7 
Air Tube × 1
Water tube × 1
Tongs × 1
Brush × 1
Casting Rings × 3
Crucible × 2
Porcelain Stick × 5
Stick Holder × 1
Round Metal Plate × 1
Frame Ring × 2
Heat Separation Plate
Capacitance × 1