Parameters:
Voltage
|
AC 220V ±10%
|
Frequency
|
50/60Hz
|
Wire plug
|
GB 3 cores/EN 3 cores
|
Max Hp
|
1100VA
|
Electric current
|
5A
|
Physical Space
|
1.2L
|
Class
|
European Class B standard
|
Sterilizing temperature
|
121℃,134℃
|
Special sterilization
|
Kill active HV,HBV,BSE and spore
|
Dry procedure
|
Deep dry
|
Display
|
Digital display
|
Safety
|
Safety valve, Automatic check
|
Water supply system
|
Two opened Reservoirs(3.5L fresh water and 5 liter waste water reservoirs), easy for sterilization and clean
|
Water quality detection
|
Detect whether water quality meet the requirement
|
Clean procedure
|
Automatic clean inside pipe and steam generator
|
Instrument containers
|
5 levels with 3 trays
|
Chamber size
|
90mm*160mm
|
Net weight
|
15.5KG
|
Feature:
·The time of sterilization is 10 mins
·Microcomputer control system for automatic check; imported Motorola sensor for precise control
·With precise control, the temperature can be controlled within ± 0.5 during sterilizing
·Friendly operation interface, simply and easy
·The dry time is adjustable according to your will
·Omron button, work well for 100 thousands
·Adjustable date&time&language mode according to your will
·Adopt imported silicon tube, high pressure and high temperature resistant
·One-piece chamber is made of imported 304 stainless steel
Safety valve ensure the chamber can release the pressure safely at emergency
·Multi-safety protection system, which can ensure the safety of the operator
·Air-conditional heat removal system, prevent the machine from over-heating
·Adopt the ABS plastic, whole model produce
·Imported Italy water pump
Prompt:
1. Please place the sterilization on a plane place , which could adjust the height by adjusting foot pad
2. Please adopt distilled water to extend the service life
3. Don't block the heat removal system on the surface of sterilization
4. Please put the instruments on the tray not touching one another allowing space for steam to pass through
5. Please empty the used water tank frequently. Usually it need empty when the clean water in the reservoir is empty.
6. Please ensure the door handle is closed tightly
7. Never try to open the chamber door if and when the pressure display doesn't show "0.0"
8. Please cut off the power and cool down the auto clave before maintenance
9. Don't drag the machine while moving
10. Power connection must be grounded properly
11. Must be provided enough power. (23L:2300VA/18L:1800VA)
12. While the outside temperature is too low, please pre-heating the machine without instruments for 30 minutes
before sterilize
13. Don't cut off the power to stop the machine directly. If you need stop the machine directly, please press the
"START/STOP" button for 3 seconds.
14. The picture in the instruction is for reference only.